The purpose of this public workshop is to educate the public and affected industry on the draft regulatory revisions planned under Sections 6 and 10 of Regulation 1138 and to hear comments and recommendations to aid in the development of the formally proposed revisions to these Delaware air toxics standards. . Note: The same public workshop is being held on April 23 in Georgetown, DE beginning at 4PM.
Additional information, including the regulatory backgrounds for both Sections 6 and 10 and the current draft of planned revisions to both standards, can be found at the following websites: For Section 6 http://www.dnrec.delaware.gov/whs/awm/Info/Regs/Pages/Section6RTR.aspx For Section 10 http://www.dnrec.delaware.gov/whs/awm/Info/Regs/Pages/AmendSection10.aspx ; 1. Review national air toxics regulatory history under the Clean Air Act. 2. Review planned revisions to Section 6, which is applicable to chromium electroplating and anodizing facilities, based on federal changes made by the EPA to similar requirements under 40 CFR Part 63 Subpart N on 9/19/12 (77 FR 58220). 3. Review planned revisions to Section 10, which is applicable to non-chromium electroplating facilities and to facilities that dry mechanical polish previously plated parts or products, based on federal changes made by the EPA to similar requirements under 40 CFR Part 63 Subpart WWWWWW on 9/19/11 (76 FR 57913). 4. Receive any additional comments and recommendations.
Division of Waste & Hazardous Substances
715 Grantham Ln
New Castle DE 19720
VIRTUAL MEETING INFORMATION
Could not connect to first map.